JIANISI Remote Control for Canon, Nikon, Sony ,Pentax, Konica minolta
To Use the Remote Control
1, For the first time use. Please pull out the plastic separator at the battery holder.
2, Mount the camera on a tripod or place the camera on a stable, level surface .
3, Press the button and rotate main command dial until(delayed remote) or (quick response remote) is displayed in the control panel.
4, Aim the transmitter on the remote control at the infrared receiver on the camera( usually within +/-30 degree of the lens axis ,from the left to the right and from the left to the right and from the top to the bosom) and press the remote outdoors, make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receive is not blocked by the lens or other obstacles.
5, How the camera focuses and shoots depends on the option selected for your cameras custorn setting .For futher information ,check your cameras manual.
6, Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.